Print this page
Detailed Parts Description
Part Number
DJM:205757
Description
1992-99 C2500/C3500 Complete DJM 5 inch Front/7 inch Rear Lowering Kit by DJM
FRONT SPINDLES WITH COIL SPRINGS / REAR AXLE FLIP KIT - MADE IN AMERICA Now you looking at a slam kit, a full 5 inches up front and 7 inch rear that puts your 1-Ton down on the ground. A combination of spindles and coil springs up front provide the front drop. You can still align to factory specs so you won’t ruin those big expensive tires but you need to be more careful about how you drive! The front end is very close to the ground, great looks comes with some responsibility so just be careful. A traditional rear axle flip kit is what we use for the rear. You get 7 inches right out of the box because your leaf spring is so thick (1-ton) that moving the axle on top gives you a full 7 inch drop. You’ll have to C-notch (all parts included) the frame to keep some travel and install the shock extenders (included) to keep your shocks vertical. There is a lot of work with this amount of drop but darn well worth it!
You can build a radical engine by combining parts made by different manufactures but you really have know what your doing! The same thing is true when it comes to suspension parts. Phone ringing: Hello this is tech how can I help you? Man I got a real problem, I lowered my truck and it’s low and I like that, it looks pretty good and I like that, but I can’t get the front end to align and it rides like crap, I don’t like that! (Tech) how did you lower it? Well I been saving and shopin for awhile and got great deals on a set of spindles, then I went down a little more with some coils and later decided to slam it by adding control arms. Then I put in a flip kit and added lowered leafs and shackles to get the back slammed, how can I fix it so I get a good ride and not destroy my tires? Advanced installers and experienced shops have done enough suspension work to know which parts you can combine without bad side effects to get “the look”. And really their knowledge came from doing it wrong sometime in the past. So if you want to do your own work and your not an expert seriously consider buying a complete suspension kit. The parts in kits are designed to work together in an optimum way, with out nasty surprises, and you should not have to buy any other parts to finish your job and get to driving around! While it is fun to fool around in the garage it’s more fun to drive around!!
Image
Picture is for representation only and may not be of the actual part
Retail Pricing
$1,765.54
$1,588.98
Parts Shipping Information
| Weight in lbs. | Dimensions in inches (if Available) | Dimensional Weight | Ship Code |
|---|---|---|---|
| 140 | 140 | 4 |
Inventory
Available: 0
On Order: 0
Kit Part Inventory - All parts must be listed as in stock in order for this to be a complete kit
| Part# | Description | Available | On Order |
|---|---|---|---|
| DJM:DS20573 | 1992-99 Chevy C2500/3500 3 inch drop Spindles, set | 0 | |
| DJM:CS23522 | 1992-99 Chevy 3500 2 inch Coils. | 0 | |
| DJM:FK10267 | 1992-99 Chevy 1 Ton. 7 inch Flip Kit | 0 |
Vehicles this part fits
1992 to 1999 Chevrolet Chev C/K Truck 1992 – 1999 C2500 / C3500 Complete DJM 5 inch Front / 7 inch Rear Lowering Kit by DJM |
1992 to 1999 GMC GMC C/K Truck 1992 – 1999 C2500 / C3500 Complete DJM 5 inch Front / 7 inch Rear Lowering Kit by DJM |